Revotec Electronic Fan Conversion Kit 90/110- 2.5 petrol/2.5 diesel/2.5 TD: DA8965

Code: DA8965

15.2″ High power suction fan

  • Ninety – 2.5 petrol/2.5 diesel/2.5 TD
  • One Ten – 2.5 petrol/2.5 diesel/2.5 TD

Kit Contents:
1 x 35mm Revotec Land Rover Fan Controller
1 x 15.2” (385mm) High Power Sucking fan
1 x Set Retrofit Mounting Brackets
All necessary mounting hardware & Instructions

Benefits of fitting an electric fan:
>
 Engine reaches operating temperature quickly, reducing wear.
Sufficient cooling when needed i.e. sitting in traffic idling.
Overcome hotter running caused by modern fuel.
Increased performance.
Improved fuel economy.
Reduced load on engine.

What makes Revotec products unique:
Quality- Fan Controller made to do the job, manufactured in the UK.
Retrofitted without any modification, keeping vehicle originality.
High quality OEM parts and components used throughout.
Each kit contains vehicle specific brackets designed to fit without permanent modification.
Each kit has been developed to give an OEM fit and appearance.
Each kit consists of a controller, fan(s) and all necessary mounting hardware.

Revotec Electronic Fan Controller vs probe type mechanical switch:
No leaks – A capillary device is prone to poor sealing
The Revotec sensor is sealed into the aluminium sensor body, giving extremely quick and accurate sensing of the water temperature.
No restriction of coolant flow.
Always in contact with the water – giving a more accurate temperature reading.195

£215.00 ex VAT

Description

Code: DA8965

15.2″ High power suction fan

  • Ninety – 2.5 petrol/2.5 diesel/2.5 TD
  • One Ten – 2.5 petrol/2.5 diesel/2.5 TD

Kit Contents:
1 x 35mm Revotec Land Rover Fan Controller
1 x 15.2” (385mm) High Power Sucking fan
1 x Set Retrofit Mounting Brackets
All necessary mounting hardware & Instructions

Benefits of fitting an electric fan:
>
 Engine reaches operating temperature quickly, reducing wear.
Sufficient cooling when needed i.e. sitting in traffic idling.
Overcome hotter running caused by modern fuel.
Increased performance.
Improved fuel economy.
Reduced load on engine.

What makes Revotec products unique:
Quality- Fan Controller made to do the job, manufactured in the UK.
Retrofitted without any modification, keeping vehicle originality.
High quality OEM parts and components used throughout.
Each kit contains vehicle specific brackets designed to fit without permanent modification.
Each kit has been developed to give an OEM fit and appearance.
Each kit consists of a controller, fan(s) and all necessary mounting hardware.

Revotec Electronic Fan Controller vs probe type mechanical switch:
No leaks – A capillary device is prone to poor sealing
The Revotec sensor is sealed into the aluminium sensor body, giving extremely quick and accurate sensing of the water temperature.
No restriction of coolant flow.
Always in contact with the water – giving a more accurate temperature reading.

Additional information

Weight 4 kg
Dimensions 45 × 43 × 10 cm