We have options on our front centre seats that allow you to have a centre seat with or without a headrest.The headrest option is not available at a later date. So if you think you require a headrest for this seat you will need to order the correct seat. The seat base is removable to allow access to the inspection plate and locates into the existing mounting points. We recommend either a static lap belt or a 3 point inertia floor mounted belt. Seat belts not included.
This seat will fit all Series 2&3 Land Rovers and all Defenders pre 2007.
PLEASE NOTE: The centre seat was designed for earlier Defenders so thats pre 2007 Puma.
Many customers do fit centre seats into post 2007 defenders however it is important to clearly understand that the Puma (post 2007) was designed to NOT take a centre seat and if fitted to the standard seat mounting points the High/Low gear shift is very very close to the front edge of the seat base.
The best solution when fitting to a puma is to mount the seat slightly back to give some suitable clearance to the gear shift, this is easier in a 110″ or a 90″ without a bulkhead. If you have a bulkhead you will need to get the seat back as far as you can and there is enough space to achieve this. This will mean drilling and making new mounting points unless you are happy with the seat position.