CAST STEEL HI-LIFT JACKS

With over 100 years of quality, the Hi-Lift Jack is a rugged, highly versatile jack that puts you in command of situations requiring lifting, pushing, pulling, winching, and clamping. Although light in weight and easy to manoeuvre, the Hi-Lift Jack offers a rated capacity of 4,660 lbs (2114 kg) and a tested capacity of 7,000 lbs (3175 kg).

Only Hi-Lift Jacks are made with a two-piece handle and socket design that is built for extended life. Cheaper imitations use a one-piece design that bends easily if lateral pressure is applied while lifting a load.

Our jacks are designed to help you survive in the most demanding situations – whether you are in the Moab desert canyons, the Welsh Mountains, the Amazon jungle, or the farmlands of Indiana. With a full-range of specially designed accessories, the Hi-Lift jack is just about the most versatile piece of off-roading / farm / auto recovery equipment you can buy

Hi-Lift Jack Specifications

Approximate weight: 30lbs (14 kg)        4,660 lbs (2113.74 kg) rated capacity        Tested capacity 7,000 lbs.

Steel bar is manufactured of specially rolled extra high carbon steel with 80,000 pound minimum tensile & carbon .69 to .82.

Steel handle of 14gauge high-yield structural tubing with minimum yield of 55,000 PSI. 1 5/16" diameter x 30" long.

Hi-Lift Jack Features

Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching.

Safety bolt is designed to shear at 7,000 lbs. (3175 kg)

For speedy disengaging, lifting unit automatically drops away when load is removed.

4 1/2" (11cm) long lifting nose for positive contact with load.

Steel bar can be reversed for extra long life.

Low pickup of 4 1/2" (11cm).

28 square inch base plate.

4 ft £59.95 + £11.99 VAT

5ft £69.95 + £13.99

ANTI-RATTLE JACK CLAMPS

Anti rattle jack clamp

Available in Red - Black - Yellow  

£12.00 + £2.40 VAT
 

Keep your Hi-Lift Jack operating trouble-free. The Fix-It-Kit has the principle parts for servicing all Hi-Lift Jack lifting units

Kit Includes:

2 Climbing Pins
2 Climbing Pin Springs
2 Cross Pins
1 Shear Bolt & Nut
1 tube of jack lubricant

£15.00 + £3.00 VAT

Designed to provide a lift point from most wheels for quick and easy lifting. The lifting capacity is 5,000lbs/2,273kgs.

£35.00 + £7.00 VAT

Convenient to use, Easy to Store. Rugged construction meets Hi-Lift Jack specifications for Strength & Durability.
Use the Hi-Lift Off-Road Base to alleviate jack sinking on soft ground.

 £40.00 + £8.00 VAT

The Hi-Lift winching kit includes;

Winch attachment, Winch tensioner, Tree strap, "D" shackle, Hi-Lift gloves and gear bag.

Winch time is reduced significantly using the winch attachment and tensioner together.

£70.00 + £14.00 VAT

This Hi-Lift accessory fits onto the lifting tongue of the Hi-Lift Jack and features a long rod that will fit into the jacking receptacles on all Land Rover Defender 90 and 110 models
 

Price £32.00 + £6.40 VAT

The Hi-Lift 4XRAC is designed for serious off-roaders who are looking for an easy, inexpensive way to stow their Hi-Lift Jack in a convenient, secure location.

£35.00 + £7.00 VAT

Designed to lift vehicle by the bumper
Hi-Lift Accessories
Designed to fit curved steel bumpers. The rugged design of the Bumper lift has a lifting capacity of 3,000lbs/1,361kgs.

£27.50 + £5.50 VAT

ADJUSTABLE TUBE JACK MOUNT

Designed for mounting a Hi-Lift jack to round and square tube bumpers, bull bars, roll cages and roof racks, this accessory allows for easy and adjustable mounting on tubes from 1” to 3” in diameter. 

Small set is for use on round tubes from 1-2” in diameter, which works on many roof racks. It can also be used on ATV/UTV bars, bumpers and roll cages.

£75.00 + £15.00 VAT

Large set is intended for round tubes from 2-3” in diameter that will work on most vehicle bull bars and roll cages

£80.00 + £16.00 VAT